Ruijie RG-S2600G-I Series User Manual

CLI ReferenceInterface Configuration Commands LLDP Configuration Commands
Ruijie(config)#lldp location elin identifier 1 elin-location 085283671111
Related
commands
Command
Description
show lldp location elin-location { identifier id |
interface interface-name | static }
Show the LLDP urgent phone number
information.
Platform
description
Only supported by switch products.
lldp management-address-tlv
Configure the management address advertised in LLDP packets. Use no form of this command to
disable the advertisement of management address.
lldp management-address-tlv [ip-address]
no lldp management-address-tlv
Parameter
description
Parameter
Description
ip-address
The management address advertised in LLDP packets.
Default
By default, the management address advertised is the IPv4 address of the lowest-ID VLAN carried on
the port.
Command
mode
Interface configuration mode.
Usage
guidelines
 By default, the management address is advertised in LLDP packets, and is the IPv4 address of
the lowest-ID VLAN carried on the port. If IPv4 address is not configured for this VLAN, the next
lowest-ID VLAN carried on the port will be tried until the IPv4 address is obtained.
 If the IPv4 address is still not found, the IPv6 address of the lowest-ID VLAN carried on the port
will be tried.
 If the IPv6 address is still not found, the MAC address of the device will be advertised as the
management address.
Examples
Configure the management address advertised in LLDP packets to 192.168.1.1:
Ruijie# configure terminal
Ruijie(config)#interface gigabitethernet 0/1
Ruijie(config-if-GigabitEthernet 0/1)#lldp management-address-tlv 192.168.1.1
Related
commands
Command
Description
show lldp local-information
Display LLDP local information

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English