CLI Reference Guide Configuration Commands of Configuration File Management
Archive configuration mode
Use the log config command to switch to the archive log
management configuration mode.
Use the end command or enter CTRL+C to return to the privileged
EXEC mode.
Use the exit command to return to the archive configuration mode.
The following example switches to the archive log management
configuration mode:
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)# archive
Ruijie(config-archive)# log config
Enter the archive configuration mode.
logging enable
Use this command to enable the function of logging the configuration change. The no form of this command is
used to disable this function.
logging enable
no logging enable
Archive log management configuration mode
To Next Page
Loading...
Need help?
General