CLI Reference Guide Configuration Commands of Configuration File Management
no hidekeys
Allow showing the passwords in the configuration log by default.
Archive log management configuration mode
The following example prohibits showing the passwords in the
configuration log:
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)# archive
Ruijie(config-archive)# log config
Ruijie(config-archive-log-config)# hidekeys
Enter the archive configuration
mode.
Enter the archive log management
configuration mode.
Enable the function of logging the
configuration change
log config
Use this command to switch to the archive log management configuation mode. The no form of this command is
used to restore all configurations in this configuration mode to the default state.
log config
no log config
To Next Page
Loading...
Need help?
General