Ruijie RG-S2600G-I Series - Show Ssh

CLI Reference SSH Configuration Commands
Parameter
Description
Parameter
Description
N/A.
N/A.
Defaults
N/A.
Command
Mode
Privileged EXEC mode.
Usage Guide
This command is used to show the information of the SSH Server, including version, enablement
state, authentication timeout, and authentication retry times.
If no key is generated for the SSH Server, the SSH version is still unavailable even if this SSH version
has been configured.
Configuration
Examples
Ruijie# show ip ssh
Related
Commands
Command
Description
ip ssh version { 1 | 2 }
Configure the version for the SSH Server.
ip ssh time-out time
Set the authentication timeout for the SSH
Server.
ip ssh authentication-retries
Set the authentication retry times for the SSH
Server.
Platform
Description
N/A
show ssh
Use this command to show the information about the SSH connection.
show ssh
Parameter
Description
Parameter
Description
N/A.
N/A.
Defaults
N/A.
Command
Mode
Privileged EXEC mode.
Usage Guide
This command is used to show the information about the established SSH connections, including
VTY number of connection, SSH version, encryption algorithm, message authentication algorithm,