CLI Reference AAA Configuration Commands
be any character strings.
It must be one of the keywords listed in the following
table. One method list can contain up to four methods.
Use the local user name database for
authorization.
Do not perform authorization.
Use the server group for authorization. At
present, the RADIUS server group is
supported.
Global configuration mode.
RGOS supports authorization of users logged in the NAS CLI and
assignment of CLI authority level(0-15). The aaa authorization exec
function is effective on condition that Login authentication function
has been enabled. It can not enter the CLI if it fails to enable the aaa
authorization exec.
You must apply the exec authorization method to the terminal line;
otherwise the configured method is ineffective.
The following example uses the RADIUS server to authorize Exec:
Ruijie(config)# aaa authorization exec default group radius
Enable the AAA security service.
Apply the command authorization to
the terminal line .
Define a local user database.
aaa authorization network
Use this command to authorize the service requests (including such protocols as PPP and SLIP) from
the users that access the network. The no form of this command is used to disable the authorization
function.
aaa authorization network {default | list-name} method1 [method2...]