CLI Reference AAA Configuration Commands
no aaa authorization console
Global configuration mode.
RGOS supports to identify the users logged in from the console
and from other terminals, configure whether to authorize the users
logged in from the console or not. If the command authorization
function is disabled on the console, the authorization method list
applied to the console line is ineffective.
The following example enables the aaa authorization console
function:
Ruijie(config)# aaa authorization console
Enable the AAA security service.
aaa
authorization
commands
Define the AAA command
authorization.
Apply the command authorization to
the terminal line..
aaa authorization exec
Use this command to authorize the users logged in the NAS CLI and assign the authority level. The no
form of this command is used to disable the aaa authorization exec function.
aaa authorization exec {default | list-name} method1 [method2...]
no aaa authorization exec {default | list-name}
When this parameter is used, the following defined
method list is used as the default method for Exec
authorization.
Name of the user authorization method list, which could
To Next Page
Loading...
Need help?
General