CLI Reference GRTD Configuration Commands
show diagnostic content
Use this command to display diagnostic test information of a particular module in privileged
EXEC mode, including all test items, attributes of test items, and configuration of test items of
the management board or slot.
show diagnostic content [slot slot_id [sub_sysytem subsys_id]]
(Optional) Subsystem ID (value range: 0-1), whose
meaning is equivalent to cpu id in the show version
command.
Example 1: The following example displays diagnostic information
of module 1:
Ruijie# show diagnostic content slot 1/0
**************************************************************
*****
*Diagnostic test suite attributes:
M/C*/-Minimal bootup level test / Complete bootup level test / NA
P/V*/-Per port test / Per device test / NA
D/N*/-Disruptive test / Non-disruptive test / NA
X*/-Not a health monitoring test / NA
F*/-Fixed monitoring interval test / NA
E*/-Always enabled monitoring test / NA
A/I*/-Monitoring in active / Monitoring in inactive / NA
Y/O*/-Key test / Non-key test / NA
B*/-Basic ondemand test / NA
R*/-Power-down line cards and need reload mainbord / NA
K*/-Require resetting the line card after the test completed /