CLI Reference DHCP Configuration Commands
Define the number of the data packets sent by the ping
operation for the detection of the address conflict
when the DHCP server assigns an IP address.
Show the address conflict that the DHCP server
detects when it assigns an IP address.
clear ip dhcp server statistics
Use this command to reset the counter of the DHCP server in privileged user mode.
clear ip dhcp server statistics
The DHCP server carries out the statistics counter, records the DHCP
address pool, automatic binding, manual binding and expired binding.
Furthermore, it also carries out the statistics to the number of sent
and received DHCP messages. The clear ip dhcp server statistics
command can be used to delete the history counter record and carry
out the statistics starting from scratch.
The example below clears the statistics record of the DHCP server.
clear ip dhcp server statistics
show ip dhcp
server statistics
Show the statistics record of the DHCP server.
debug ip dhcp client
Use this command to carry out the DHCP client debugging in privileged user mode. Use the no form of this
command to turn off the debugging switch.
debug ip dhcp client
no debug ip dhcp client
To Next Page
Loading...
Need help?
General