Ruijie RG-S2600G-I Series User Manual

CLI Reference IPv6 Configuration Commands
Physical MTU
Link MTU of the interface.
!M | M
!M indicates the managed-config-flag bit in the
RA is not set.
M: Conversely
!O | O
!O indicates the other-config-flag bit in the RA
is not set.
O: Conversely
Description of the fields of the prefix list in ra-info:
Field
Meaning
total
The number of the prefixes of the interface.
fec0:1:1:1::/64
A specific prefix.
Def
Indicate that the interfaces use the default
prefix.
Auto | CFG
Auto: Indicate the prefix is automatically
generated after the interface is configured with
the corresponding IPv6 address. CFG: Indicate
that the prefix is manually configured.
!Adv
Indicate that the prefix will not be advertised.
vltime
Valid lifetime of the prefix, measured in
seconds.
pltime
Preferred lifetime of the prefix, measured in
seconds.
L | !L
L: Indicate that the on-link in the prefix is set.
!L: Indicate that the on-link in the prefix is not
set.
A | !A
A: Indicate that the auto-configure in the prefix
is set. !A: It indicates that the auto-configure in
the prefix is not set.
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
show ipv6 neighbors
Use this command to show the IPv6 neighbors.
show ipv6 neighbors [ vrf vrf-name ] [ verbose ] [ interface-id ] [ ipv6-address ]
show ipv6 neighbors static

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English