Ruijie RG-S2600G-I Series User Manual

CLI Reference Guide QoS Configuration Commands
Default DSCP to CoS mapping table
DSCP
0
8
16
24
32
40
48
56
CoS
0
1
2
3
4
5
6
7
mls qos trust
Use this command to configure the trust mode on an interface. Use the no form of this command to restore it to
the default.
mls qos trust [cos | dscp | ip-precedence]
no mls qos trust
Parameter
description
Parameter
Description
cos
The QoS trust mode of the port is
CoS.
dscp
The QoS trust mode of the port is
DSCP.
ip-precedence
The QoS trust mode of the port is
IP-PRE.
no
Restore it to the default value.
Default
configuration
N/A.
Command
mode
Interface configuration mode.
Examples
Ruijie(config)# interface gigabitethernet 1/1
Ruijie(config-if)# mls qos trust cos
Related
commands
show mls qos interface interface-id
Platform
description
N/A
mls qos cos
Use this command to configure the CoS value of an interface. Use the no form of this command to restore it to the

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English