CLI Reference Guide QoS Configuration Commands
default.
mls qos cos default-cos
no mls qos cos
Restore it to the default value.
Interface configuration mode.
Ruijie(config)# interface gigabitethernet 1/1
Ruijie(config-if)# mls qos cos 7
show mls qos interface interface-id
interface rate-limit
Use this command to set the rate limit on the port.
rate-limit { input | output } bps burst-size
no rate-limit
Limited bandwidth per second
The dscp-list range varies with products
Restore it to the default value.
Interface configuration mode.
To Next Page
Loading...
Need help?
General