Ruijie RG-S2600G-I Series User Manual

CLI Reference RADIUS Configuration Commands
RADIUS Configuration Commands
ip radius source-interface
Use this command to specify the source IP address for the RADIUS packets. Use the no form of this
command to delete the source IP address for the RADIUS packet.
ip radius source-interface interface
no radius source-interface
Parameter
description
Parameter
Description
Interface
Interface that the source IP address of the
RADIUS packet belongs to.
Default
The source IP address of the RADIUS packet is set by the network
layer.
Command
mode
Global configuration mode.
Usage
guidelines
In order to reduce the NAS information to be maintained on the
RADIUS server, use this command to set the source IP address of
the RADIUS packet. This command uses the first IP address of the
specified interface as the source IP address of the RADIUS packet.
This command is used in the layer 3 devices.
Examples
The following example specifies that the RADIUS packet obtains an
IP address from the fastEthernet 0/0 interface and uses it as the
source IP address of the RADIUS packet:
Ruijie(config)# ip radius source-interface fastEthernet 0/0
Related
commands
Command
Description
radius-server
host
Define the RADIUS server.
ip address
Configure the IP address of the
interface.
radius-server attribute 31
Use this command to specify the MAC-based format of RADIUS Calling-Station-ID attribute in the global
configuration mode. Use the no form of this command to restore to the default value.

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English