Ruijie RG-S2600G-I Series - Action Counter

CLI Reference SEM Configuration Commands
Ruijie(config-applet)#event tag monitor_cmd none
Ruijie(config-applet)#action 00 cli command "enable"
Ruijie(config-applet)#action 10 cli command "clear arp-cache"
Ruijie(config-applet)#action 20 cli command "clear ip route *"
Ruijie(config-applet)#commit
Ruijie(config-applet)#exit
Related
commands
Command
Description
smart manager
applet
Define the command line based SEM policy.
policy record
Configure the size for recording CLI action
outputs.
smart manager
policy record
Clear CLI records generated during the
execution of SEM policy.
Platform
description
N/A
action counter
In SEM configuration mode, use this command to configure the policy action that operates the
SEM counter. The no form of this command deletes the action with the specified label.
action label counter name counter-name value counter-value op {dec | inc | nop | set}
no action label
Parameter
description
Parameter
Description
label
Label of the action
name
counter-name
Name of the operated counter.
value counter-value
Numerical value used in the operation.
op { dec | inc nop
|set }
Method used in the operation.
Default
configuration
By default, no action is configured.
Command
mode
SEM configuration mode