CLI Reference GRTD Configuration Commands
Example 1: Use the show diagnostic schedule slot all command
to display the following:
Ruijie#sho diagnostic schedule slot 1/0
Schedule #1:
To be run on daily 12:00
Test ID(s) to be executed : 1 2 3 4 5 6 7 8
Schedule #2:
To be run on June 15 2012 19:00
Test ID(s) to be executed : 1
Ruijie#
Set the planned test timetables for
modules.
show diagnostic status
Use this command to display all current diagnostic test status in privileged EXEC mode.
show diagnostic status
This command has no default setting.
Use the show diagnostic status command to display all current
diagnostic test status.
Example 1: Use the show diagnostic status command to display
the following:
To Next Page
Loading...
Need help?
General