CLI Reference Guide Syslog Configuration Commands
Syslog Configuration Commands
clear logging
Use this command to clear the logs from the buffer.
clear logging
This command clears the log packets from the memory buffer. You cannot clear the statistics of the
log packets.
The following example clears the log packets from the memory buffer.
Ruijie# clear logging
Record logs on different devices.
Show the logs in the buffer.
Record the logs to the memory buffer.
logging buffered
Use this command to set the memory buffer parameters (log severity, buffer size) for logs. The no form
of this command disables recording logs in memory buffer. The default form of this command restores
the memory buffer size to the default value.
logging buffered [buffer-size | level]
no logging buffered
default logging buffered
To Next Page
Loading...
Need help?
General