CLI Reference IGMP Snooping Configuration Commands
IGMP Snooping Configuration Commands
deny
To deny the forwarding of the multicast streams in the range specified by the profile, execute the deny
configuration command in the profile configuration mode.
deny
The forwarding of the multicast streams in the range specified by the
profile is denied.
Profile configuration mode.
First, configure the multicast range using the range command in the
profile configuration mode. In addition, the profile must be applied to
the interface in order to make the profile configuration take effect.
The following is an example of deny the forwarding of the multicast
stream 224.2.2.2:
Ruijie(config)# ip igmp profile 1
Ruijie(config-profile)# range 224.2.2.2
Ruijie(config-profile)# deny
Configure the multicast address range.
ip igmp profile
This is a mode navigation command. Use this command to select a profile and enter the IGMP profile
configuration mode.
ip igmp profile profile-number
no ip igmp profile profile-number
Profile number, in the range from 1 to 65535