CLI Reference DHCPv6 Snooping Configuration Commands
Clear the IPv6 address prefix
entry.
Clear the MAC address prefix
entry.
Clear the VLAN prefix entry.
Clear the interface prefix entry.
This command is used to clear the generated user information in the
dhcpv6 snooping prefix list.
Ruijie# clear ipv6 dhcp snooping prefix
This command is supported on all switches.
clear ipv6 dhcp snooping statistics
Use this command to clear the statistical information of the dhcpv6 packets.
clear ipv6 dhcp snooping statistics
This command is used to clear the statistical information of the
dhcpv6 packets.
To Next Page
Loading...
Need help?
General