CLI Reference DHCPv6 Snooping Configuration Commands
Ruijie# clear ipv6 dhcp snooping statistics
This command is supported on all switches.
debug ipv6 dhcp snooping
Use this command to trurn on the debugging switch of the DHCPv6 snooping.
debug ipv6 dhcp snooping {event | packet}
no debug ipv6 dhcp snooping {event | packet}
The event debugging message. Trace
the DHCPv6 SNP event processing in
real time, such as the VLAN、 AP
change process; generating and
deleting the binding entry; the
switchover message of hot backup
and hot plugging/ubplugging, ect.
The dhcpv6 packet debugging
messge. Trace the dhcpv6 packets
in real time, such as each path
action and the reason of packet
drooping, ect.
Ruijie# debug ipv6 dhcp snooping event
This command is supported on all switches.
To Next Page
Loading...
Need help?
General