Ruijie RG-S2600G-I Series - Ipv6 Redirects

CLI Reference IPv6 Configuration Commands
N/A
N/A
Defaults
The local address of the link is always used as the source address to send neighbor requests.
Command
Mode
Global configuration mode.
Usage Guide
None.
Configuration
Examples
Ruijie(config)# no ipv6 ns-linklocal-src
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
ipv6 redirects
Use this command to control whether to send ICMPv6 redirect message when the switch receives
and forwards an IPv6 packet through an interface. Use the no form of this command to disable the
function.
ipv6 redirects
no ipv6 redirects
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
The ICMPv6 redirect message is permitted to be sent on the IPV6 interface.
Command
Mode
Interface configuration mode.
Usage Guide
The transmission rate of any ICMPv6 error message is limited. By default, it is 10pps.
Configuration
Examples
Ruijie(config-if)# ipv6 redirects
Related
Commands
Command
Description
show ipv6 interface
Show the interface information.