When this parameter is used, the following defined
method list is used as the default method for Network
authorization.
It must be one of the keywords listed in the following
table. One method list can contain up to four methods.
Use the server group for authorization. At
present, the RADIUS server group is
supported.
RGOS supports authorization of all the service requests related to the
network, such as PPP and SLIP. If authorization is configured, all the
authenticated users or interfaces will be authorized automatically.
Three different authorization methods can be specified. Like
authorization, the next method can be used for authorization only
when the current authorization method does not work. If the current
authorization method fails, other subsequent authorization method is
not used.
The RADIUS server authorizes authenticated users by returning a
series of attributes. Therefore, RADIUS authorization is based on
RADIUS authorization. RADIUS authorization is performed only when
the user passes the RADIUS authorization.
The following example uses the RADIUS server to authorize network
services:
Ruijie(config)# aaa authorization network default group radius
To Next Page
Loading...
Need help?
General