Ruijie RG-S2600G-I Series - Page 73

CLI Reference Guide Configuration Commands of Configuration File Management
Configuration Commands of
Configuration File Management
archive
Use this command to switch to the archive configuration mode. The no form of this command can be used to
restore all configurations in the archive configuration mode to the default state.
archive
no archive
Parameter
description
Parameter
Description
-
-
Default
-
Command
mode
Global configuration mode.
Usage
guidelines
Use the archive command to switch to the archive configuration
mode.
Use the end command or enter CTRL+C to return to the privileged
EXEC mode.
Use the exit command to return to the global configuration mode.
Examples
The following example switches to the archive configuration mode:
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)# archive
Related
commands
Command
Description
-
-
hidekeys
Use this command to prohibit showing the passwords in the configuration log. The no form of this command can
be used to allow showing the passwords in the configuration log.
hidekeys