CLI Reference Guide Configuration Commands of Configuration File Management
The following example enables the function of logging the
configuration change:
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)# archive
Ruijie(config-archive)# log config
Ruijie(config-archive-log-config)# logging enable
Enter the archive configuration
mode.
Enter the archive log
management configuration
mode.
logging size
Use this commad to specify the maximum number of the entries saved in the configuration log. The no form of
this command is used to restore it to the default value.
logging size entries
no logging size
The maximum number of the
entries saved in the
configuration log, in the range
of 1 to 1000.
Archive log management configuration mode
The following example specifies the maximum number of the entries
saved in the configuration log as 50:
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
To Next Page
Loading...
Need help?
General