CLI Reference Guide Configuration Commands of Configuration File Management
Ruijie(config)# archive
Ruijie(config-archive)# log config
Ruijie(config-archive-log-config)# logging size 50
Enter the archive configuration
mode.
Enter the archive log
management configuration mode.
notify syslog
Use this command to allow sending the configuration change notification to the remote log server. The no form of
this command can be used to prohibit sending the configuration change notification to the remote log server.
notify syslog
no notify syslog
Prohibit sending the configuration notification to the remote log server
by default.
Archive log management configuration mode
The following example allows sending the configuration change
notification to the remote log server:
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)# archive
Ruijie(config-archive)# log config
Ruijie(config-archive-log-config)# notify syslog
Enter the archive configuration mode.
To Next Page
Loading...
Need help?
General