Ruijie RG-S2600G-I Series - Page 78

CLI Reference Guide Configuration Commands of Configuration File Management
log config
Enter the archive log management
configuration mode.
logging enable
Enable the function of logging the
configuration change.
show archive log config
Use this command to show the entry information of the configuraiton log.
show archive log config {{all | start-num [end-num]} [provisioning | contenttype [plaintext]] |
statistics}
Parameter
description
Parameter
Description
all
Show all entry information of the
configuration log.
start-num
[end-num]
Specifying the start-num means
showing all configuration logs starting
with this record. If the end-num is
specified at the same time, it will show
the configuration logs with the record
number between the start-num and
end-num. if the start-num is 0, it will
show the configuration logs from the
first entry. If the end-num is 0, it will
show all configuration logs starting with
the start-num. The start-num and
end-num are both in the range of 0 to
2147483647.
provisioning
Show the configuration logs in the
format shown in the configuration file.
contenttype
Specify the showing format of the
configuration logs.
plaintext
Specify the configuration logs to be
shown in the ordinary text format.
statistics
Show the memory usage of the
configuration log.
Default
N/A.
Command
mode
Privileged EXEC mode.