CLI ReferenceInterface Configuration Commands LLDP Configuration Commands
Global configuration mode
Use this command to enter the LLDP Civic Address configuration mode.
Configure the Civic Address information of LLDP MED-TLV. ID: 1.
Ruijie#config
Ruijie(config)#lldp location civic-location identifier 1
Ruijie(config-lldp-civic)#
show lldp location civic-location { identifier id |
interface interface-name | static }
Show the LLDP Civic Address
information.
Only supported by switch products.
lldp location elin identifier
Configure the encapsulated urgent phone number of Location Identification TLV. Use no form of this
command to delete the urgent phone number information.
lldp location elin identifier id elin-location tel-number
no lldp location elin identifier id
ID of the urgent phone number information. Range: 1-1024.
Urgent phone number. Range: 10-25 characters.
Global configuration mode
Use this command to configure urgent phone number information.
Create urgent phone number information.
Ruijie#config
To Next Page
Loading...
Need help?
General