CLI Reference CFM Configuration Commands
show cfm mep service-instance
Use this command to show the MEP(maintenance association end point) configurations.
show cfm mep mep-id service-instance instance-id
MEP (maintenance association end
point) id, in the range of 1-8191.
Service instance id, in the range of
1-32767.
Ruijie# show cfm mep 100 service-instance 1
Show the MEP(maintenance association end
point).
show cfm mep-list service-instance
Use this command to show the MEP(maintenance association end point) list information.
show cfm mep-list [service-instance instance-id]
By default, all MEP(maintenance association end point) list
information are shown.
To Next Page
Loading...
Need help?
General