CLI Reference  IP Address Configuration Commands 
hardware  address  corresponding  to  the  IP 
address 
Age of the ARP learning, in minutes 
Layer2 port associated with the ARP 
ARP type, includes the Static, Dynamic, Trust, 
Local. 
Layer  3  interface  associated  with  the                   
IP addresses 
This command is supported on the Layer 3 switch, but not supported on 
the router. 
show arp packet statistics 
Use this command to show the statistics of ARP packets. 
show arp packet statistics [ interface-name ] 
Show  the  statistics  of  ARP  packets  on  the  specified 
interface.