CLI Reference GRTD Configuration Commands
Before command line tests are started,
you need to stop system health
monitoring tests and planned tests
about to be conducted.
Example 1: The following example starts the tests for all test items
of module 2.
ruijie#diagnostic start slot 2 test all
Running test(s)1,5-11,13-15,17-26 may disrupt normal
system
Do you want to continue? [no]:yes
ruijie#
Show the results of command line
tests.
diagnostic stop
Use this command to stop diagnostic tests of a particular module or slot in privileged EXEC
mode.
diagnostic stop [slot slot_id [sub_system subsys_id]]
(Optional) Subsystem ID (value range: 0-1), whose
meaning is equivalent to cpu id in the show version
command.
This command has no default setting.
To Next Page
Loading...
Need help?
General