Ruijie RG-S2600G-I Series - Page 1071

CLI Reference SEM Configuration Commands
event application
In SEM configuration mode, this command monitors the event published by the action
publish-event. The no form of this command is used to delete the specified event.
event tag event-name [correlate {andnot | and | or }] application subsystem subsystem-id type
event-type
no event tag event-name
Parameter
description
Parameter
Description
event-name
Event name.
correlate {andnot |
and |or}
(optional) correlationship between current
event and previous all event combinations in
the case of multiple events.
subsystem
subsystem-id
Subsystem ID of the monitored event.
type event-type
Type ID of the minotored event.
Default
configuration
By default, no event is configured.
Command
mode
SEM configuration mode
Usage
Guideline
The event application command is used to monitor the events
published by action publish-event to allow one policy to drive
another.
subsystem-id and event-type are used to differentiate events. A
policy is triggered only when the subsystem-id and event-type
published by action publish-event are identical with those set by this
command.
Available events:
Variable Name
Function
_application_sub_system
Indicates the subsystem
that publishes a certain
event
_application_type
Indicates the type of the
published event
_application_data1
Indicates parameter 1 for
event publishing
_application_data2
Indicates parameter 2 for
event publishing
_application_data3
Indicates parameter 3 for
event publishing