Ruijie RG-S2600G-I Series - Page 1099

CLI Reference SEM Configuration Commands
Note
When several events are configured for a policy, SEM
automatically arranges the events alphabetically in a
parallel relationship. The other events are taken as the
additional conditions of the first event. The relations among
all the events except the first event are the one between
current event and the combination of all the previous
events. Therefore, the first event is blocked out for the
parallel relationship and the default relation is and.
Note
When several events are configured for a policy, SEM
automatically arranges the events alphabetically in a
parallel relationship. The other events are taken as the
additional conditions of the first event. The relations among
all the events except the first event are the one between
current event and the combination of all the previous
events. Therefore, the first event is blocked out for the
parallel relationship and the default relation is and.
Event variables available to all policies:
Variable Name
Function
_event_id
Indicates the event triggering ID
_event_type
Indicates the type ID of the event
detector that triggers the policy
_event_type_string
Indicates the description of the event
detector that triggers the policy
_event_pub_time
Indicates the start time of the event
_event_pub_sec
Indicates the start time of the event
(UNIX time)
_event_pub_msec
Indicates the start time (in ms) of the
event
Examples
Example 1: Create a command line based policy with the name as
Test_A.
Ruijie(config)#smart manager applet Test_A
Ruijie(config-applet)#
Example 2: Create a command line based policy with the name as
Test_B and class as D.
Ruijie(config)#smart manager applet Test_B class D
Ruijie(config-applet)#
Field
Description
class D
Groups the policy to class D