CLI Reference SEM Configuration Commands
By default, it is not executed.
The following example configures the name of the event with none type
to Test_1, and logs after triggered.
Ruijie(config)#smart manager applet Test_1
Ruijie(config-applet)#event tag monitor_cmd none
Ruijie(config-applet)#action 00 syslog msg "none event triggered
with $_none_argc argc"
Ruijie(config-applet)#commit
Ruijie(config-applet)#exit
Define the command line based SEM policy.
smart manager scheduler clear
In the privileged EXEC mode, this command clears the SEM event queues.
smart manager scheduler clear {all | policy job-id |class class-options }
Specify the trigger ID of the policy.
By default, no policy running instance is cleared.
To Next Page
Loading...
