Ruijie RG-S2600G-I Series - Page 1107

CLI Reference SEM Configuration Commands
smart manager scheduler release
smart manager scheduler release {all | policy policy-id | class class-options}
Parameter
description
Parameter
Description
all
All policies
policy policy-id
Specify the trigger ID of the policy.
class class-options
Specify the class of the running policy.
Default
configuration
By default, it is release.
Command
mode
Privileged EXEC mode
Usage
Guideline
This command is the inverse process of the “smart manager scheduler
hold”.
Examples
The following example releases all monitors and all queue transmissions.
Ruijie#smart manager scheduler release all
Related
commands
Command
Description
smart manager
applet
Define the command line based SEM policy.
smart manager scheduler
In the global configuration mode, use this command to configure the thread pool of SEM policy
category and set the thread pool size. The no form of this command is used to restore the SEM
policy thread pool to the default.
smart manager scheduler thread class class-options number thread-number
no smart manager scheduler thread class class-options
Parameter
description
Parameter
Description
thread class
class-options
SEM policy category contained in the thread
pool.
number
Number of thread in the pool.