Ruijie RG-S2600G-I Series - Page 1117

CLI Reference SEM Configuration Commands
Command
mode
Privileged EXEC mode
Usage
Guideline
This command is used to show the policy instance being executed.
Examples
The following example executes the show smart manager policy active
command.
Key: P - Priority :L - Low, H - High, N - Normal
S - Scheduling mode :A - Active, P -Pending
No. Job Id P S Status Time Of Event Event Type
Policy Name
1 3159 N A running Wed Nov11 10:28:14 2009 none
Test_1
2 3160 N A running Wed Nov11 10:28:38 2009 none
Test_1
3 3161 N A running Wed Nov11 10:28:38 2009 none
Test_1
4 3162 N A running Wed Nov11 10:28:39 2009 none
Test_1
5 3163 N A running Wed Nov11 10:28:39 2009 none
Test_1
6 3164 N A running Wed Nov11 10:28:40 2009 none
Test_1
The following example executes the show smart manager policy active
detailed command.
Key: P - Priority :L - Low, H - High, N - Normal
S - Scheduling mode :A - Active, P -Pending
No. Job Id P S Status Time Of Event Event Type
Policy Name
1 3159 N A running Wed Nov11 10:28:14 2009 none
Test_1
exec time: Wed Nov11 10:28:14 2009 elapsed time 142.768
maxrun 31536000.000
2 3160 N A running Wed Nov11 10:28:38 2009 none
Test_1
exec time: Wed Nov11 10:28:38 2009 elapsed time 119.024
maxrun 31536000.000
3 3161 N A running Wed Nov11 10:28:38 2009 none
Test_1