Ruijie RG-S2600G-I Series - Page 1130

CLI Reference VSU Configuration Commands
show switch virtual
Show the domain ID, the ID, status and role of each device.
show switch virtual
Parameter
Description
Parameter
Description
N/A
N/A
Default
Configuration
N/A
Command
Mode
Privileged EXEC mode
Usage
Guidelines
N/A
Configuration
Examples
#Example 1: standalone mode
Ruijie# show switch virtual
Current system is running in "STANDALONE" mode.
#Example 2: VSU mode, three member switches
Ruijie#show switch virtual
Switch_id Domain_id Priority Status Role
---------------------------------------------------------
1(1) 1(1) 100(100) OK ACTIVE switch-1
2(2) 1(1) 100(100) OK CANDIDATE switch-2
3(3) 1(1) 100(100) OK STANDBY switch-3
Related
Commands
Command
Description
switch
Configure the switch ID.
switch sw_id priority
Configure the switch priority.
switch sw_id renumber
Modify the switch ID.
switch sw_id domain
Modify the domain ID.
switch virtual domain
Configure the VSU virtual switch ID.
Platform
Description
N/A
show switch virtual balance
Show the traffic balancing configuration in the VSU mode.
show switch virtual balance