Ruijie RG-S2600G-I Series - Page 1141

CLI Reference VSU Configuration Commands
device.
Platform
Description
N/A
switch sw_id renumber
Modify the ID of any switch in the VSU mode. The no form of this command is used to restore the
default value.
switch sw_id renumber new_sw_id
no switch sw_id
Parameter
Description
Parameter
Description
sw_id
Indicates the ID of the currently running device in the VSU mode. The
value rang is 1 to 8.
new_sw_id
Indicates the modified switch ID.
Default
Configuration
1
Command
Mode
config-vs-domain configuration mode
Usage
Guidelines
This command can only be executed in the VSU mode instead of the standalone mode. The
configuration becomes valid only after the device restarts.
The no form of this command is used to restore the default value 1 of sw_id.
Configuration
Examples
#Modify the ID of Switch 1 to 2 in the VSU mode.
Ruijie(config)# switch virtual domain 1
Ruijie(config-vs-domain)# switch 1 renumber 2
#Modify the ID of Switch 2 to the default value in the VSU mode.
Ruijie(config)# switch virtual domain 1
Ruijie(config-vs-domain)# no switch 2
Related
Commands
Command
Description
switch
Configure a switch ID in the standalone mode.
show switch virtual
Check the domain ID, the ID and role of each
device.
Platform
Description
N/A