CLI ReferenceInterface Configuration Commands Interface Configuration Commands
type is changed, the attributes of the new port type take default values, which can
be modified as needed.
Ruijie(config)# interface gigabitethernet 1/1
Ruijie(config-if)# medium-type copeer
Show the interface information.
The 12 SFP interfaces of the 24SFP/12GT line cards and 1210/100/1000M
BASE-T interfaces allow for dynamic switching.
The combo interface cannot automatically determine whether the current port is an
SFP or 10/100/1000M BASE-T interface.
Use this command to set the MTU on the interface.
64 to 9216 (or 65536, which varies by products)
By default, the num is 1500.
Interface configuration mode.
Set the maximum transmission unit (MTU) that is supported on the interface.
Ruijie(config)# interface gigabitethernet 1/1
Ruijie(config-if)# mtu 9216
Show the interface information.
Use the shutdown command in the interface configuration mode to disable an
To Next Page
Loading...
