Ruijie RG-S2600G-I Series - Page 191

CLI ReferenceInterface Configuration Commands Interface Configuration Commands
copper
GigabitEthernet 1/0/21 down 1 Unknown Unknown copper
GigabitEthernet 1/0/22 down 1 Unknown Unknown
copper
GigabitEthernet 1/0/23 down 1 Unknown Unknown copper
GigabitEthernet 1/0/24 down 1 Unknown Unknown copper
GigabitEthernet 1/0/25 down 1 Unknown Unknown copper
Example 13 shows the status statistics of all member ports in VLAN 1 (only
displays the information of parts of the ports, not the information of all ports).
Ruijie# show interfaces status vlan 1
Interface Status Vlan Duplex Speed
Type
-------------------------------- -------- ---- -------
--------- ------
GigabitEthernet 1/0/18 down 1 Unknown Unknown copper
GigabitEthernet 1/0/21 down 1 Unknown Unknown copper
GigabitEthernet 1/0/22 down 1 Unknown Unknown copper
GigabitEthernet 1/0/23 down 1 Unknown Unknown
copper
GigabitEthernet 1/0/24 down 1 Unknown Unknown copper
GigabitEthernet 1/0/25 down 1 Unknown Unknown copper
Example 14 shows the bandwidth usage value of the specified GigabitEthernet 0/1
port.
Ruijie# show interfaces gigabitethernet 0/1 usage
Interface Bandwidth Bandwidth Usage
-------------------------------- -------------
-----------------
GigabitEthernet 0/1 100000 Kbit 0.0%
Related
Commands
Command
Description
duplex
Duplex
flowcontrol
Flow control status.
interface
gigabitEthernet
Selects the interface and enter the interface configuration
mode.
interface
aggregateport
Creates or accesses the aggregate port, and enters the
interface configuration mode.
interface vlan
Creates or accesses the switch virtual interface (SVI), and
enters the interface configuration mode.
shutdown
Disables the interface.
speed
Configures the speed on the port.
switchport priority
Configures the default 802.1q interface priority.
switchport
protected
Specifies the interface as a protected port.