CLI ReferenceInterface Configuration Commands MAC Address Configuration Commands
Setting the management and learning mode of the dynamic MAC
address to the uniform mode can improve the L2 switching efficiency.
After changing the MAC learning mode, you must save it and restart
before the new mode takes effect.
show mac-address-table
mac-manage-learning
Show the MAC management and
learning mode.
mac-manage-learning uniform learning-synchronization
Use this command to synchronize the dynamic MAC address in the whole device in the uniform mode.
[no] mac-manage-learning uniform learning-synchronization
Global configuration mode.
In the uniform mode, the synchronization of the dynamic MAC
address in the whole device can further improve the L2 switching
efficiency. You can use the no form of this command to cancel the
synchronization.
show mac-address-table
mac-manage-learning
Show the MAC address
management and learning mode.
To Next Page
Loading...
