CLI ReferenceInterface Configuration Commands Protocol VLAN Configuration Commands
Protocol VLAN Configuration Commands
protocol-vlan profile (in global configuration mode)
Use this command to configure message type and Ethernet type profile.
protocol-vlan profile num frame-type type ether-type type
Use this command to delete the specified profile.
no protocol-vlan profile num
Use this command to delete all profiles.
Type of message and Ethernet
Global configuration mode.
Ruijie(config)# protocol-vlan profile 1 frame-type
ETHERII ether-type aarp
show protocol-vlan profile
show protocol-vlan profile num
no protocol-vlan profile num
protocol-vlan profile (in interface configuration mode)
Use this command to apply some profile to an interface.
protocol-vlan profile num vlan id
Clear the specified profile on the port.
no protocol-vlan profile id