Ruijie RG-S2600G-I Series - Page 236

CLI ReferenceInterface Configuration Commands Private VLAN Configuration Commands
svlist
Secondary VLAN list.
no
Remove all the promiscuous secondary
VLANs.
Default
configuration
No promiscuous secondary VLAN is configured.
Command
mode
Hybrid interface configuration mode of private VLAN
Examples
Ruijie(config)# interface gigabitEthernet 0/1
Ruijie(config-if)# switchport mode private-vlan
promiscuous
Ruijie(config-if)# switchport private-vlan mapping 22 add 23-25
Related
commands
Command
Description
show vlan private-vlan
Platform
description
The software version must be RGOS10.1 and later.
switchport private-vlan promiscuous trunk
Use this command to configure the ports as a promiscuous trunk port , which is associated with the L2
port and the private VLAN. Multiple pairs are allowed to associate.
[no] switchport private-vlan promiscuous trunk p_vid_s_list
Parameter
description
Parameter
Description
p_vid
Primary VID
svlist
Secondary VLAN list.
no
Remove all the relationships between the
layer-2 ports and private VLANs.
Default
configuration
None.
Command
mode
Interface configuration mode
Examples
Ruijie(config)# interface gigabitEthernet 0/2
Ruijie(config-if)# switchport mode trunk