Ruijie RG-S2600G-I Series User Manual

CLI ReferenceInterface Configuration Commands LLDP Configuration Commands
Examples
Configure the lldp network-policy (profile-num: 1): voice application type; ID: untagged; voice-signaling
application type; VLAN ID: 3; COS: 4; DSCP: 6.
Ruijie#config
Ruijie(config)#lldp network-policy profile 1
Ruijie(config-lldp-network-policy)# voice vlan untagged
Ruijie(config-lldp-network-policy)# voice-signaling vlan 3 cos 4
Ruijie(config-lldp-network-policy)# voice-signaling vlan 3 dscp 6
Related
commands
Command
Description
show lldp network-policy profile [ profile-num ]
Show the LLDP network-policy.
Platform
description
Only supported by switch products.
show lldp local-information
Display the LLDP information of local device. The information will be encapsulated in the TLVs and sent
to the neighbor device.
show lldp local-information [ global | interface interface-name ]
Parameter
description
Parameter
Description
interface-name
Interface name
Default
-
Command
mode
Privileged EXEC mode
Usage
guidelines
 global parameter: display the global LLDP information to be sent.
 Interface parameter: displays the LLDP information to be sent out the interface specified.
 No parameter: display all LLDP information, including global and interface-based LLDP
information.
Examples
Display the device information to be sent to neighbor device:
Ruijie# show lldp local-information
Global LLDP local-information:
Chassis ID type : MAC address
Chassis id : 00d0.f822.33aa
System name : System name
System description : System description
System capabilities supported : Repeater, Bridge, Router

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English