CLI ReferenceInterface Configuration Commands LLDP Configuration Commands
PoE support : NO
Link aggregation supported : YES
Link aggregation enabled : NO
Aggregation port ID : 0
Maximum frame Size : 1500
LLDP-MED organizationally information
Power-via-MDI device type :
Power-via-MDI power source :
Power-via-MDI power priority :
Power-via-MDI power value :
Run the show lldp neighbors command to show the information description table.
The latest update time of neighbor information
The aging time of neighbor information, that is, the number of
seconds that will elapse before the neighbor information is
deleted.
Chassis ID is used to identify a device. MAC addresses are
usually used as Chassis IDs.
The description of the system, including hardware/software
versions and operational system information.
System capabilities supported
Functions supported by the system
System capabilities enabled
Functions used by the system
Management address subtype
Interface numbering subtype
Management address interface type
Management address interface ID
Management address object ID
Med device types: Network connectivity device and terminal
device.
Network connectivity device
Class I: common terminal devices
Class II: media terminal devices. The devices have the
capabilities of Class I and support media flows.
Class III: communication terminal devices. The devices have
the capabilities of Class I and Class II and support IP
communication.