Ruijie RG-S2600G-I Series - Page 346

CLI ReferenceInterface Configuration Commands QinQ Configuration Commands
show l2protocol-tunnel
Use this command to show transparent transmission configuration of L2 protocol.
show l2protocol-tunnel { gvrp | stp }
Parameter
description
Parameter
Description
gvrp
Show configuration of transparently transmitting
gvrp protocol.
stp
Show configuration of transparently transmitting
stp protocol.
Default
configuration
N/A .
Command
mode
Privileged EXEC mode.
Examples
Ruijie# show l2protocol-tunnel stp
L2protocol-tunnel: Stp Enable
Ruijie# show l2protocol-tunnel gvrp
L2protocol-tunnel: gvrp Disable
Platform
description
The software version must be RGOS10.3 and later.