Ruijie RG-S2600G-I Series - Page 370

CLI Reference IP Address Configuration Commands
show arp counter
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
N/A
Command
Mode
Any.
Usage Guide
N/A
Configuration
Examples
The following is the output result of the show arp counter command:
Ruijie# show arp counter
The Arp Entry counter:0
The Unresolve Arp Entry:0
The meaning of each field in the ARP cache table is described in Table 1.
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
show arp detail
Use this command to show the details of the Address Resolution Protocol
(ARP) cache table.
show arp detail [ interface-type interface-number | ip [ mask ] |
mac-address | static | complete | incomplete ]
Parameter
Description
Parameter
Description
interface-type
interface-number
Show the ARP of the layer 2 port or the layer 3
interface.
ip
Show the ARP entry of the specified IP
address.
ip mask
Show the ARP entries of the network segment
included within the mask.
mac-address
Show the ARP entry of the specified MAC
address.
static
Show all the static ARP entries.
completev
Show all the resolved dynamic ARP entries.