Ruijie RG-S2600G-I Series User Manual

CLI Reference DHCP Configuration Commands
ip dhcp pool
Define the name of the DHCP
address pool and enter the DHCP
address pool configuration mode.
netbios-node-type
Define the node type of netbios for
the client host.
netbios-name-server
Use this command to configure the WINS name server of the Microsoft DHCP client NETBIOS in the DHCP
address pool configuration mode. The no form of this command can be used to delete the WINS server.
netbios-name-server ip-address [ ip-address2…ip-address8 ]
netbios-name-server
Parameter
description
Parameter
Description
ip-address
IP address of the WINS server. It is
required to configure one IP address at
least.
ip-address2…ip-address8
(Optional) IP addresses of WINS servers.
Up to 8 WINS servers can be configured.
Default
No WINS server is defined, by default.
Command
mode
DHCP address pool configuration mode.
Usage
guidelines
When more than one WINS server is defined, the former has higher
priory. The DHCP client will select the next WINS server only when its
communication with the former WINS server fails.
Examples
The configuration example below specifies the WINS server
192.168.12.3 for the DHCP client.
netbios-name-server 192.168.12.3
Related
commands
Command
Description
ip address dhcp
Enable the DHCP client on the interface
to obtain the IP address.
ip dhcp pool
Define the name of the DHCP address
pool and enter the DHCP address pool
configuration mode.
net-node-type
Define the node type of the host netbios
of the client.
netbios-node-type
Use this command to define the node type of the master NetBIOS of the Microsoft DHCP client in the DHCP
address configuration mode. The no form of this command can be used to delete the configuration of the NetBIOS
node type.

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English