Ruijie RG-S2600G-I Series - Page 442

CLI Reference DHCP Configuration Commands
configuration mode. The no form of this command can be used to delete the Option82 matching information of
the CLASS.
relay agent information
no relay agent information
Parameter
description
Parameter
Description
-
-
Default
N/A.
Command
mode
Global CLASS configuration mode.
Usage
guidelines
After executing this command, it enters the Option82 matching
information configuration mode which is shown as “Ruijie
(config-dhcp-class-relayinfo)#”.
In this configuration mode, user can configure the class matching
multiple Option82 information.
Examples
The configuration example below configures a global CLASS and enter
the Option82 matching information configuration mode.
Ruijie(config)# ip dhcp class myclass
Ruijie(config-dhcp-class)# relay agent information
Ruijie(config-dhcp-class-relayinfo)#
Related
commands
Command
Description
ip dhcp class
Define a CLASS and enter the global
CLASS configuration mode.
relay-information hex
Use this command to enter the Option82 matching information configuraiton mode. The no form of this command
can be used to delete a piece of matching information.
relay-information hex aabb.ccdd.eeff… [*]
no relay-information hex aabb.ccdd.eeff… [*]
Parameter
description
Parameter
Description
aabb.ccdd.eeff…[*]
Hexadecimal Option82 matching
information. The „*‟ symbol means
partial matching which needs the front
part matching only. Without the „*‟
means needing full matching.
Default
N/A.