Ruijie RG-S2600G-I Series - Page 467

CLI Reference DHCPv6 Configuration Commands
interface-number
interfaces information.
Defaults
N/A
Command
Mode
Privileged mode.
Usage Guide
Use this command to display the relay server interface enabled by Relay Agent, and forward the
received DHCPv6 packets on the client to the specified destination addresses through specified
interfaces (optional).
Configuration
Examples
Example 1: Display the destination address configuration information of all relay client
Ruijie# show ipv6 dhcp relay destination all
Interface: Vlan1 // enable relay port
Destination address(es) Output Interface
3001::2
FF02::1:2 //the specified address Vlan2 //the specified the
output port
Related
Commands
Command
Description
Platform
Description
N/A.
show ipv6 dhcp relay statistics
Use this command to show the packet sending and receiving condition with the DHCPv6 Relay
function enabled.
show ipv6 dhcp relay statistics
Parameter
Description
Parameter
Description
N/A.
N/A.
Defaults
N/A.
Command
Mode
Privileged EXEC mode.
Usage Guide
N/A.
Configuration
Ruijie# show ipv6 dhcp relay statistics