CLI Reference FTP CLIENT Configuration Commands
Use the ftp-client ascii command to set the FTP transfer mode to text (ASCII). Use the no form of this
command to restore the default setting.
ftp-client [vrf vrfname] ascii
no ftp-client [vrf vrfname] ascii
Sets the file transfer mode for the specified VRF.
The default FTP transfer mode is binary.
Global configuration mode
This command sets the file transfer mode to the text (ASCII) mode.
Set the file transfer mode to ASCII.
Ruijie (config)# ftp-client ascii
Use the ftp-client port command to set the FTP data connection mode to active (PORT). Use the no
form of this command to restore the passive mode, in which the client initiates a connection to the
server for data transmission.
ftp-client [vrf vrfname] port
To Next Page
Loading...
