Ruijie RG-S2600G-I Series - Page 511

CLI Reference IPv4 REF Configuration Commands
Related
commands
Command
Description
show ip ref route
Displays all routing information in the current REF
module.
Platform
description
N/A
Command
history
Version
Description
-
-
show ip ref route
This command can be used to display all the routing information on the current REF
module. This command is as follows:
show ip ref route [default | ip mask]
Parameter
Description
Parameter
Description
default
Specifies default route.
ip
Specifies the destination IP address of route.
mask
Specifies the route mask.
Default
configuratio
n
None
Command
mode
Privileged EXEC mode
Usage guide
Display the related routing information in the current REF table, and specify the
default route and all the routing information matching IP/MASK.
Configuratio
n examples
Example 1: Display all the routing information in the REF table.
Ruijie#show ip ref route
Codes: * - default route
# - zero route
ip mask adj-id next-hop weight interface
224.0.0.0 224.0.0.0 1 0.0.0.0 1
192.168.52.0 255.255.255.0 11 0.0.0.0 1
FastEthernet 0/0
192.168.52.255 255.255.255.255 1 0.0.0.0 1