Ruijie RG-S2600G-I Series - Page 560

CLI Reference IGMP Snooping Configuration Commands
Ruijie(config)# ip igmp profile 1
Ruijie(config-profile)# range 224.2.2.2 224.2.2.244
Related
commands
Command
Description
ip igmp
profile
Create a profile.
deny
Deny the forwarding of the multicast
streams in the range specified by the profile.
permit
Permit the forwarding of the multicast
streams in the range specified by the profile.
debug igmp-snp
Use the following commands to turn on igmp service debug switch. The no form of this
command closes debug switch.
debug igmp-snp
debug igmp-snp event
debug igmp-snp packet
debug igmp-snp msf
debug igmp-snp warning
undebug igmp-snp
undebug igmp-snp event
undebug igmp-snp packet
undebug igmp-snp msf
undebug igmp-snp warning
Parameter
description
Parameter
Description
none
Show all debug information of
IGMP Snooping.
event
Show the debug information of
IGMP Snooping event.
packet
Show the debug information of
IGMP Snooping packet.
msf
Show the debug information
exchanged between the IGMP
Snooping and multicast.
warning
Show all debug information of
IGMP Snooping warning.
Command
Privileged EXEC mode.